RotoMill Specs

877 1st Ave NW · Sioux Center, IA 51250 · Toll Free 866-722-1488 · Fax 712-722-1487

Roto-Mill Model Specifications

MODEL	500	700	1820	3620
Roll Size	9" X10"	9" X 14"	9" X 34"	12" X 48"
Horsepower
Electric* (Shelled Corn)	5	7.5	25	60
Electric* (Small Grain)	7.5	10	30	75
PTO/Trailer**	N/A	20	60	110

*Electiric mills with discharge augers usually require the next larger size motor.

**PTO units with integral blowers or blower drive kit require proportinately higher PTO HP (10-20)

Specifications
Bushels Per Hour Capacity Guide*

* Capacities are approximate and will vary depending upon quality, moisture content of grain.

Model	Corr.	Dry Corn	Hi-Moisture Corn	Ear Corn Dry	Ear Corn Wet	Milo	Small Grains Oats-Barley	Lbs/Hrs Silage
500	4	450	400
	6.5	330	300			320	200
	8	290	260			280	180
	10	250	220			260	160
700	4	700	600					12000
	6.5	520	450			400	300	10000
	8	450	390			360	270
	10	330	300			320	240
1820	4	1800	1600	900	900			42000
	6.5	1350	1200			1200	900	37800
	8	1170	1040			1080	810
	10	990	880			970	720
3620	4	3600	3200	1600	1600			84000
	6.5	2700	2400			2350	1760	75600
	8	2340	2080			2110	1580
	10	1980	1760			1880	1410
ROLL CURRUGATION GUIDE Roto-Mill offers one point adjustment to set both rolls with one lever. Offset speeds are standard and are used with high moisture grains. Same speed rolls are available for dry products, but reduce capacity. Grooves Per Inch - GPI 4 GPI - Shelled corn, earcorn and corn silage 6 1/2 GPI - Corn and Milo 8 GPI - Oats, barley, wheat, milo, hog and poultry feed (all purpose) 10 GPI - Oats, barley, wheat 14 GPI - Special - Consult Factory